1、It allows communicate at 38.4Kbps via RS-485 configuration or Ethernet TCP/IP networks. 2、Large capacity, it supports 30,000 cardholders, which can easily and efficiently meet your needs. 3、Various hardware protection measures, there is excessive protection, voltage protection, inversion protection for the power supply and the entire input and output terminal. 4、It can be integrated with other security systems such as CCTV, fire alarm, bas (building automation system) and other systems to configure the total security system. 5、Supports different Wiegand formats, and can connect to different readers, including ID card reader. 6、Connect with a variety of sensors, alarms, exit buttons, electric lock and other devices. 7、Variety of communication function, which can bring you much convenience. 8、Using a serial or TCP / IP communication, it provides a reliable network system. 9、B/S structure software, it is easy to manage the system by client PC browser. There is no need to install software on each client. 10、Allows you to set normally opening after using the first card. 11、Real-time monitoring of door status, using the management software, it allows real-time control and control of the opening of doors and closing of the entire system. 12、Link different doors with special logic that one door is open, others must be closed. 13、Multi-card operation, this function is used to manage visitors or to manage a special place of high security. Doors will open when the cards registered in number are read. 14、With anti-return and force mode, making it safer for using. 15、The system integrator can use the SDK to integrate the hardware into their existing access control software system or develop new software. Condition: 100% Brand New Item Type: Door Controller Material: PCB Model: C3-200 CPU: 32 bit MIPS CPU RAM: 32M bit Flash Memory: 256M bit User: 30000 Event Buffer: 100,000 Power/Current: DC 9.6V-14.4V, rated maximum 1A Reader Port: 4 (26-bit Wiegand, 8-bit PIN burst) Communication: RS485, TCP/IP Input Port: 6 Output Port: 2 (4 FORM-C relay output, SPDT 5A @ 36VDC / 8A @ 30VAC) 2 (4 auxiliary FORM-C relay output, SPDT 2A @ 30VDC) LED Indicator: Communication, power, status and punch card Battery: 1 x CR2032 battery (Built-in) Operating Temperature: 0°C - + 55°C Working Humidity: 10%-80% relative humidity without condensation 1 x Access Control Panel 1 x Instruction