Feature: 1. AUTOMATIC IDENTIFICATION: The intelligent identification technology enables the multimeter to automatically identify the measured parameters and select the required range, which greatly improves your measurement efficiency. 2. HIGH RESOLUTION SCREEN: Three test results can be displayed on the color LCD screen, namely voltage, frequency and analog bars. 3. CLEAR FONT: The multimeter's screen background color is black, which provides a clear contrast to the colorful numbers and letters, making it very easy to read. 4. SMART STANDBY: When there is no signal input for about 10 seconds, the multimeter will automatically reduce the screen brightness and increase the battery life. 5. RECHARGEABLE: The charging cable is included after purchasing the multimeter, so you don't need to worry about the battery problem, it can be used immediately after charging. Specification: Item Type: Multimeter Material: Plastic Auto Mode: Can automatically identify AC voltage, DC voltage, resistance. Display: Color LCD Maximum Display Value: 9999 digits. Polarity Indication: Automatic indication, - means negative polarity. Overrange Display: 0L or -0L Sampling Rate: About 3 times/second. Automatic Shutdown Time; 5 minutes. Low Battery Indication: LCD display symbol. Standby: When there is no measurement signal input, the screen brightness will be reduced after about 10 seconds. Working Temperature and Humidity: 0-40°C, 0-80%RH Storage Temperature and Humidity: -10-60°C,0-70%RH Power Supply: Built in 700mAh lithium battery (delivered with built in battery) Working Height: Up to 2000 meters Input Resistance: 10MΩ Maximum Input Voltage: 620V. Package List: 1 x Multimeter2 x Test Pen1 x Cable1 x User Manual1 x Bag Note: Warning:1. When measuring high voltage, please be careful to avoid electric shock2. Do not input AC and DC voltage higher than 620V, otherwise it may damage the meter.3. Before measuring the capacitor, please discharge the capacitor first, do not input AC and DC voltage.4. After completing all measurements, disconnect the test leads from the circuit under test.