Key benefits Reliable compatibility with common mains in regions using 5060 Hz and 85139 VAC, supporting standard equipment without the need for special adaptations. Flexible current handling for steady operation and short peak demands, with continuous current up to 8 A and a capability of 10 A for up to 10 seconds. Defined minimum resistance to meet certain load and safety requirements, helping to maintain stable performance in appropriate circuits. Core specifications Frequency: nominal 5060 Hz Voltage input: 85139 VAC Current: continuous 8 A; intermittent 10 A for 10 seconds Resistance: minimum 15 ohms Function and performance Designed to operate devices that run on 5060 Hz mains within the 85139 VAC range. Supports sustained operation at 8 A and accommodates brief higher current demands up to 10 A for short durations, enabling startup or peakload scenarios without exceeding rated limits. The minimum resistance specification (15 ohms) provides a defined load characteristic for compatible systems and applications. Compatibility and use considerations Suitable for equipment and test setups that are designed for 5060 Hz operation and input voltage within 85139 VAC. Ensure your power source can reliably supply up to 8 A continuously, with a brief allowance for up to 10 A for up to 10 seconds when required. Applicable in configurations where a minimum resistance of 15 ohms is part of the design or safety requirement. use scenarios Scenario 1: Power a lab instrument or consumer device that operates at about 120 VAC and draws up to 8 A continuously, ensuring stable operation within the stated limits. Scenario 2: Run a device that occasionally requires a short peak current, such as during startup or startuprelated testing, up to 10 A for a 10 second interval. Scenario 3: Include in a test bench or system where a defined minimum resistance of 15 ohms is specified to meet electrical criteria during evaluation or validation. Notes on size and material Size and material details are not provided in the current specification. If you have requirements for enclosure dimensions, connectors, or construction materials, these should be confirmed from the product datasheet or manufacturer.