Name: Electronic Drain Valve Indicator Lamp: LED indicating on/off Voltage Range: ±10% Protection Grade: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Temperature: 90°C Ambient Temperature: -40°C to 60°C Maximum Current Consumption: 4 mA Supply Voltage: 24–240V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 seconds Time Interval (OFF): 0.5–45 minutes Widely used in filters, separators, dryers, gas tanks, drip legs, and other compressed air system components Clean the compressed air system before installation Observe flow direction when installing the valve; outlet must not be blocked or impacted by hoses Supply voltage must match drain valve voltage specification When using DC power, positive pole must be connected to terminal 1 Drain valve comes with pre-attached cable: brown wire is L (live), blue wire is N (neutral), yellow-green wire is GND (ground) Tighten the screws on the terminal box securely to prevent water ingress Warning: When installing the electronic drain valve, ensure that: - Compressed air has been fully released (system is depressurized) - Power supply has been disconnected Color: Gold + Black Material: Metal Size: Aperture: 5 mm Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: Other items shown are not included Note: Lighting and display settings may cause slight variation in color representation Measurement error allowed: ±1–3 cm