Automatic water level control for tank float valve towers

NOK 524,00
GRATIS frakt

Automatic water level control for tank float valve towers

Solgt av:

NOK 524,00

Spar NOK 150,00 (22%)

Veiledende pris

NOK 674,00
På lager
GRATIS frakt

14-dagers returpolicy

Betalingsmåter:

  • Merke: Unbranded

Produktdetaljer

Produktdetaljer

Automatic water level control for tank float valve towers

This check valve can replace traditional float valves and is compatible with various high-level water tanks, pools, and towers in industrial and civil buildings. It automatically controls water flow, replenishes at low levels, and automatically stops when full. It has four inlets for large water output, a beautiful appearance, a compact size, and is practical and convenient to install. It requires no electricity, is easy to use, has a long service life, a low failure rate, and saves water resources. Operating pressure range: 1-10KG (0-1-1MPa). Compatible media: clean water; compatible media temperature: 70℃; high-temperature resistant media temperature: 70℃-120℃. When the water level in the pool or check valve drops, the check valve body sinks and the check valve control valve core opens. When the water pressure in the pipeline changes, the sealing surface of the control valve will open and water will flow out, and vice versa. Note that this product is a level control valve. When installing, the float must be vertical. If it needs to be installed from the top, an elbow is required to connect the valve float and the inlet pipe. First, the inlet pipe should be fixed on a horizontal surface. Then, connect the automatic water level control valve to the inlet according to the standard. The inner diameter of the main inlet should be the same as the normal diameter of the control valve. When in use, the valve's shut-off valve should be fully open. If two valves are installed in the same pool, the two valves should be kept on the same horizontal surface. Before installation, please clean the impurities in the pipe to avoid blockage. If the water quality is poor, the valve needs to be properly maintained. If the user finds that the water filling time is too long, simply flush the inlet. Material: Nylon PA66 + food-grade rubber. Size: 72x50x70mm. Quantity: 1 piece. Note: Please allow an error of 1-3mm due to manual measurement. Please ensure that you do not mind before bidding. Due to differences in different monitors, the picture may not reflect the actual color of the item. Thank you. Package contents: 1 x Water level control valve
  • Fruugo-ID: 544793497-1101311396
Sikkerhet

Produktsikkerhetsinformasjon

Vennligst se produktsikkerhetsinformasjonen som er spesifikk for dette produktet skissert nedenfor

Følgende informasjon er gitt av den uavhengige tredjepartsforhandleren som selger dette produktet.

Produktsikkerhetsetiketter

CE Mark
Sikkerhetsadvarsler: Select the appropriate model based on specifications.

Levering

Leveranse

Sendes i løpet av 2 dager

  • STANDARD: GRATIS - Levering mellom kl tor. 29 oktober 2026–man. 09 november 2026 - GRATIS

Sendes fra Kina.

Retur

Retur

Vi gjør vårt beste for å sikre at produktene du bestiller, leveres til deg i sin helhet og i samsvar med dine spesifikasjoner. Skulle du likevel motta en ufullstendig bestilling eller andre varer enn dem du bestilte, eller hvis du av en eller annen grunn ikke er fornøyd med bestillingen, kan du returnere bestillingen eller enkeltvarer i bestillingen og motta full refusjon for varene.

Se fullstendige retningslinjer for retur