Specifications:  Version: KIT, PNP, PNP Professional Version, PNP+Flight Controller (optional);  Material: EPP/ABS/Carbon Fiber;  Wingspan: 690mm;  Height: 88mm;  Length: 415mm;  Max Endurance: >70 minutes;  Max Mileage: >45km;  Min Flight speed: <27km/h;  Maximum Flight speed: ≥220+km/h;  KIT Weight: 150g(epp-30)/190g(epp-20);  Take Off Weight: 350g~850g;  Battery Compartment: 175mm*175mm*55mm (Max dimension);  ESC Compartment: 70mm*38mm*20mm (Max dimension);  Note: when speed is≥100km/h, should install lens cover to prevent excessive inflow air form blowing awa the hatch.     2205 Motor Specifications:  Dimention: 29mm*20mm;  Slot/pole: 12N14P;  Shaft Diameter: 5mm-Internal gear M3;  Weight: 30g (exclude wire);  Max Current: 30A;  Max Power: 450W;  Work Voltage: 2S (7.4V)~4S (14.8V);  Wire Specifications: 20 - 180mm;  Interphase Internal Resistance: 68mΩ;  Max. Thrust: 922g(6*4E 2-Blade Propeller).     FX35A ESC Specifications:  Rated Current: 35A ( lasts for 180 seconds);  Instantaneous Current: 50A ( lasts for 10 seconds);  Input Voltage: 7 4V~14.8V (2S~4S);  UBEC Output: NO;  Dimention: 48.5*14.5mm ( exclude wire);  Signal Wire: 120 mm;  Power Input Wire: 18 , length: 100mm;  Weight: 9.5g ( include wire).     GDW 12g Servo Specifications:  Item Name: DS031MG Metal Gear Digital Servo;  Voltage Range: 4.8V-6V;  Working Temperature: -20℃ ~+60℃;  Working Frequency: 1520μs/333Hz;  Speed: 5V = 0.13sec/60°， 6V = 0.11sec/60°;  Torque: 5V = 2.25kg/cm, 6V = 2.7kg/cm;  Wire Length: 260mm;  Weight: 12g.     UBEC Specifications:  Item Name: MAMBA UBEC 5V 2A;  Input Voltage: 7.4V-14.8V;  Output Voltage: 5V;  Output Current: 2A;  Dimension: 17x11mm;  Weight: 1g.     VTX Fixed Seat Specifications:  Item Name: VTX Fixed Seat;  Material: ABS;  Seat Install Size: 47mm x 17mm;  Flight Controller Install Size: 30.5mm x 30.5mm / 20mm x 20mm.     Features:  - Independent detachable lens plug for both FPV and visual observation flights.  - Wings have embedded carbon fiber rods with different angles.  - Small wingspan with large space for electronics electronics.  - Four magnets are applied to the hatch for better fastening.  - The new wingtip design supports vertical take-off mode.  - Supports horizontal and vertical battery mounting.  - Tailored lens ring for better protection.  - All new propeller locking method.  - Tailored for DJI Digital Air unit.     KIT Version Included:  1x Ultra Delta Wing EPP Body;  2x VTX Fixed Seat;  1x Hardware Kit;  1x Lipo Strap;  1x 6x4E Prop;  1x 5x5E Prop.     PNP Version (Unassembled) Included:  1x Ultra Delta Wing EPP Body;  2x VTX Fixed Seat;  1x Hardware Kit;  1x Lipo Strap;  1x 2204-2200KV Motor;  1x FTC 20A ESC;  2x 9g Plastic Gear Digital Servo;  1x Flight Controller;  2x 5045 Propeller.