60MHz High Precision DDS Function Signal Generator Dual Channel Digital Arbitrary Waveform Generator with Pulse Frequency Meter and Modulation

Experience precise and versatile signal generation with this advanced DDS Signal Generator, designed with cutting-edge Direct Digital Synthesizer (DDS) technology to deliver stable, pure, and low distortion signals. Featuring a vibrant 2.4-inch TFT color LCD with 320x240 resolution, the device simultaneously displays parameters and waveform graphics for both CH1 and CH2 channels, allowing easy monitoring and control. Key Features: · High Precision DDS Technology: Provides stable output signals with ultra-low jitter (RMS <200ps) and 14-bit vertical resolution using a high-speed D/A converter for exceptional waveform accuracy and purity. · Dual Channels with Full Functionality: Two independent channels with channel synchronization capabilities support waveform and state copying, multi-channel output up to 16 channels, and adjustable phase precision to 0.01° for advanced applications. · Wide Frequency Range and Sampling Rate: Offers sine wave output frequencies of up to 20MHz, 60MHz, or 100MHz depending on the model, with sampling rates from 250MSa/s to 300MSa/s for smooth and detailed waveform generation. · Extensive Waveform Support: Includes 35 preset waveforms (sine, square with adjustable duty cycle, pulse with precise width and cycle settings, triangle, CMOS, noise, DC, and more) plus storage for up to 64 user-defined arbitrary waveforms with 8192 points each for detailed signal replication. · Multiple Modulation Modes: Supports versatile modulation types including AM, FM, PM, ASK, FSK, and PSK, enabling complex signal modulation for a wide range of testing and development scenarios. · Advanced Sweep and Burst Functions: Enables sweeping of frequency, amplitude, offset, and duty cycle with linear or logarithmic modes and adjustable sweep times (0.01s to 999.99s), along with burst output featuring manual, internal, and external triggers for precise pulse train control. · Voltage Control Oscillator (VCO) Function: Allows external input signal control over frequency, amplitude, offset, duty cycle, and PWM modulation to suit sophisticated experimental requirements. · Accurate Counter and Measurement: Equipped with dual coupling modes (DC and AC) to ensure accurate signal measurement and eliminate common AC coupling inaccuracies. · User-Friendly Storage and Communication: Saves up to 20 custom parameter sets for quick recall and supports PC control with open communication protocols for secondary development. · Robust and Portable Design: Constructed with durable ABS plastic featuring a table-type form factor and powered by a universal AC power supply (100-240V), making it reliable and convenient for various environments. Specifications: · Material: ABS Plastic · Display: 2.4 inch TFT Color LCD (320 x 240) · Sine Wave Frequency: 0-20MHz / 0-60MHz / 0-100MHz (Model dependent) · Sampling Rate: 250MSa/s (20M, 60M), 300MSa/s (100M) · Output Amplitude Range: 1mV to 24Vpp (20M, 60M), 1mV to 25Vpp (100M) · Vertical Resolution: 14 bits · Waveform Length: 8192 points * 14 bits · Minimum Pulse Width: 20ns · Modulation Types: AM, FM, PM, ASK, FSK, PSK · Non-Volatile Storage: 64 user-defined arbitrary waveforms (8K * 14 bits each) · Power Supply: AC 100-240V (Wide Voltage Range) · Dimensions: 210 x 195 x 75mm (L x W x H) · Weight: 611g (Item), 1065g (Package) Package Includes: · 1 x DDS Signal Generator · 1 x Power Cable · 1 x USB Data Cable · 1 x BNC-BNC Cable · 2 x BNC-Clip Cable This DDS Signal Generator is the perfect choice for professionals and hobbyists requiring high-precision arbitrary waveform generation, comprehensive signal modulation, and multi-channel synchronous output. Its advanced features and user-friendly interface make it ideal for research, testing, and development in electronics, communications, and signal processing fields.