Feature: 1. The use of a 3‑phase AC permanent magnet synchronous generator can effectively reduce the resistance torsion, and the wind wheel and the generator are well matched. 2. The host adopts a hoop installation design, and the 5 blades are easy to install and disassemble, which improves the stability of the unit. 3. The blade is made of nylon fiber, which is resistant to aging deformation, good corrosion resistance and long service life. 4. This product uses an external controller, which greatly enhances the safety and stability of the machine's operation. 5. The number of generators can be increased at any time, and it can also be used with solar systems to form a wind‑solar hybrid power generation system. Specification: Item Type: Wind Turbine Kit Model: DT-HL-600W-white Rated Power: 600W Rated Wind Speed: 12m/s Start Wind Speed: 2m/s Safe Wind Speed: 45m/s Number of Blades: 5pcs Blade Material: Nylon fiber Generator: 3-phase AC permanent magnet synchronous generator Controller System: Electromagnetic/yaw Installation Method: Hoop mounting Adjustment Method: Automatic adjustment of wind direction angle Working Temperature: -40℃-80℃ Mounting Rod Diameter Range: 48-54mm/1.9-2.1in. Package List: 1 x Wind Turbine5 x Blades1 x Gasket1 x Controller1 x Fastening Tool Kit1 x Wrench1 x User Manual Note: 1. When assembling, please place the generator, do not drop, knock, or touch, otherwise it may damage the product and affect the use.2. When connecting the controller, be sure to follow the wiring diagram on the controller to wire, otherwise it will affect the normal use of the product, and the product will be burnt in severe cases.3. After assembling, first confirm whether each screw is fixed well before using.4.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.