433Mhz Wireless Remote Control Switch DC 12V 1CH Relay Receiver Module and RF Transmitter Electronic Lock Control DIY Universal

NOK 309,00
+ NOK 142,99 i frakt

433Mhz Wireless Remote Control Switch DC 12V 1CH Relay Receiver Module and RF Transmitter Electronic Lock Control DIY Universal

  • Merke: Unbranded
Solgt av:

433Mhz Wireless Remote Control Switch DC 12V 1CH Relay Receiver Module and RF Transmitter Electronic Lock Control DIY Universal

  • Merke: Unbranded

NOK 309,00

Spar NOK 1 190,00 (79%)

Veiledende pris

NOK 1 499,00
På lager
+ NOK 142,99 i frakt
Solgt av:

NOK 309,00

Spar NOK 1 190,00 (79%)

Veiledende pris

NOK 1 499,00
På lager
+ NOK 142,99 i frakt

Vi godtar følgende betalingsmetoder

Beskrivelse

433Mhz Wireless Remote Control Switch DC 12V 1CH Relay Receiver Module and RF Transmitter Electronic Lock Control DIY Universal 433Mhz Wireless Remote Control Switch DC 12V 1CH Relay Receiver Module and RF Transmitter Electronic Lock Control DIY Universal Input Voltage: 12 V, RF working mode: Superheterodyne Receiver sensitivity: > 97 dbm Transmitting distance:> 100 m ( open space) Decoding mode: MCU software decoding Remote storage: 20 Support remote type: EV1527 learning code Working mode: Momentary, toggle, latching time delay (5s ,10s ,15s ) Output terminal: NO , NC , COM Remote control battery: 2 x 3 V CR button batteries Note: Maximum input power is 250 V Operating Function Description (1) Code learning operation Inching learning code: After the controller is connected to the power, briefly press the learning code button (the light flashes once), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful learning code, and the working mode is inching mode. Self locking code learning: After the controller is connected to the power, briefly press the code learning button twice (once the light flashes), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful code learning, and the working mode is automatic mode. Interlocking code learning: After the controller is connected to the power, briefly press the code learning button three times (press once to flash the light once), and then long press and hold one button on the remote control for 3 seconds (such as key A). The controller indicator light flashes and remains on, and then press another button on the remote control (such as key B). The controller indicator light flashes to indicate successful code learning, and the working mode is interlocking mode (such as AB interlocking). Delay for 5 seconds to learn code: After the controller is connected to the power, briefly press the learn code button four times (once the light flashes), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful code learning, and the working mode is automatic shutdown mode with a delay of 5 seconds. Delay of 10 seconds for learning code: After the controller is connected to the power, briefly press the learn code button five times (once the light flashes), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful learning code, and the working mode is automatic shutdown mode with a delay of 10 seconds. Delay for 15 seconds to learn code: After the controller is connected to the power, briefly press the learn code button six times (once the light flashes), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful code learning, and the working mode is automatic shutdown mode with a delay of 15 seconds. Delayed code learning by 20 seconds: After the controller is connected to the power, briefly press the code learning button seven times (once the light flashes), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful code learning, and the working mode is automatic shutdown mode with a delay of 20 seconds. (2) Clear code operation Press and hold the learn code button on the controller for 5 seconds until the indicator light flashes, indicating successful code clearing. (3) Clear code operation Jog mode: After learning the code for a single button on the remote control, press the button relay to engage, and release the button relay to disconnect. Self locking mode: After learning the code for a single button on the remote control, press the button relay once to engage and then press the button relay again to disconnect. Interlock mode: After learning the codes for the two buttons on the remote control, press the A key to activate the relay, and press the B key to deactivate the relay. Delay mode: After learning the code for a single button on the remote control, press the button relay to engage, and after the delay, it will automatically disconnect. _x000D_
  • Fruugo-ID: 423670142-891349724
  • EAN: 7872414379026

Produktsikkerhetsinformasjon

Vennligst se produktsikkerhetsinformasjonen som er spesifikk for dette produktet skissert nedenfor

Følgende informasjon er gitt av den uavhengige tredjepartsforhandleren som selger dette produktet.

Produktsikkerhetsetiketter

CE Mark
Sikkerhetsadvarsler: WARNING! TO AVOID DANGER OF SUFFOCATION,KEEP AWAY FROM BABIES ANDCHILDREN. DO NOT USE IN CRIBS/BEDSOR PLAY PENS.THIS BAG IS NOT ATOY.
Ingredienser: Octinoxate 5.3212%
Produsentens delenummer: JY202627
Modellnummer: JY199530
Serienummer: JY062027
Batchnummer: JY196638

Levering og retur

Sendes i løpet av 3 dager

  • EXPRESS: NOK 142,99 - Levering mellom kl ons. 29 oktober 2025–fre. 07 november 2025

Sendes fra Kina.

Vi gjør vårt beste for å sikre at produktene du bestiller, leveres til deg i sin helhet og i samsvar med dine spesifikasjoner. Skulle du likevel motta en ufullstendig bestilling eller andre varer enn dem du bestilte, eller hvis du av en eller annen grunn ikke er fornøyd med bestillingen, kan du returnere bestillingen eller enkeltvarer i bestillingen og motta full refusjon for varene. Se fullstendige retningslinjer for retur

Produktoverholdelsesdetaljer

Vennligst se samsvarsinformasjonen som er spesifikk for dette produktet skissert nedenfor.

Følgende informasjon er gitt av den uavhengige tredjepartsforhandleren som selger dette produktet.

Produsent:
Følgende informasjon skisserer kontaktinformasjonen til produsenten av det aktuelle produktet som selges på Fruugo.

  • UMCU
  • shenzhenshixiangpulitiankejiyouxiangongsi
  • 301 (308), No. 32, Xiangyin Road, Nanlian Community, Longgang Street, Longgang District
  • Shenzhen
  • China
  • 518000
  • teuneva@126.com
  • 13535306199
  • https://www.fruugo.co.uk/umcu/m-17124?language=en

Ansvarlig person i EU:
Følgende informasjon skisserer kontaktinformasjonen til den ansvarlige personen i EU. Den ansvarlige personen er den utpekte økonomiske aktøren basert i EU, som er ansvarlig for samsvarsforpliktelsene knyttet til det relevante produktet som selges til EU.

  • EC REP SERVICES SL
  • EC REP SERVICES SL
  • Calle Gran Via 49, 7 DCH.
  • Madrid
  • Spain
  • 28013
  • ecrepservice@hotmail.com
  • 34682797075