2x White Polypropylene (PP) M8 x 200mm Threaded Rods, Studding + 4 Nuts

BP1: 2x fully threaded plastic rods. 4 nuts included. Material: PP / Polypropylene. White colour. Size: M8 x 200 mm. Diameter: 8 mm. Pitch: 1.25 mm. SKU: 991.. BP2: Polypropylene is lightweight and absorbs very little moisture, useful for compact PP spacer work.. BP3: Material caution — PP is less stiff than nylon or reinforced nylon, so check thread fit and tightening method.. BP4: The fully threaded 200 mm length accepts compatible M8 nuts along the rod and can be cut carefully to shorter sections.. BP5: Use for light-duty spacing, alignment and positioning where a lightweight PP M8 threaded rod is preferred.. || PRODUCT DESCRIPTION SUMMARY: These white PP M8 x 200 mm threaded rods are supplied as 2 fully threaded polypropylene plastic rods. Polypropylene is a lightweight plastic with very low moisture absorption and useful electrical insulation, with resistance to many acids and alkalis when the grade suits the environment. This 200 mm format is suited to compact spacers, small panel gaps and short non-metallic positioning points, especially where a simple non-metallic threaded bar is preferred over a metal fixing. The continuous thread accepts compatible M8 nuts along the rod and can be cut carefully into shorter sections. PP is less stiff than nylon or reinforced nylon, so check thread fit, tightening force and application suitability before use. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M8 x 200mm. Colour_Ref: White. Material_Ref: PP / Polypropylene. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 200 x 8 x 8. || Additional Specifications: Pitch_MM: 1.25. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Material: Polypropylene, Head/Drive Type: Fully Threaded Rod, size: M8 x 200, D: 8 mm, Pitch: 1.25 mm, L: 200 mm