Name: Electronic Drain Valve Model: 507292 Indicator Lamp: LED indicating power on/off Voltage Range: +/-10% Protection Rating: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Operating Temperature: 90C Operating Ambient Temperature: -40C to 60C Maximum Current Consumption: 4 mA Power Supply Voltage: 24-240V AC/DC, 50/60 Hz Discharge Time (ON): 0.510 seconds Time Interval (OFF): 0.545 minutes Widely used in separators, dryers, gas tanks, drip legs, and other compressed air system components For cleaning compressed air system installations Installation Notes: - Observe correct valve orientation during installation; do not use hose at outlet and avoid exposure to direct air impact - Power supply voltage must match drain valve specifications - When using DC power, connect positive wire to terminal "1" - When wiring the drain valve: brown wire is live (L), blue wire is neutral (N), yellow-green wire is safety ground (GND) - Securely tighten the long screw on the terminal box to prevent water ingress Warning: - Ensure compressed air system is fully depressurized before installation - Disconnect power supply before installation or maintenance Color: Gold + Black Material: Metal Size: 5 mm Inlet/Outlet Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: The package includes only the items listed above. Other accessories are not included. Lighting and display settings may cause slight color variations between the product image and actual item. Measurement error allowance: +/- 13 cm.