1 set of tensioning belts 800 kg, belt width 50 mm one piece. Strap and ratchet. Metal handle, no plastic. Longer durability Standard EN12195-2 Our load securing straps meet the legal requirements. All legal notices are labelled on the webbing The entry tether is suitable for almost every use. Whether for hobby campervan transporters or freight forwarders. For easy strapping of goods in trailer semi-trailers Place the straps around the bundle, then pull the lashing straps through the metal ratchet and tighten with a lever until tension is reached Represents responsible load security: whether you are a camper, a caravan driver, a transport contractor or a truck driver, you will always get very good and consistent quality from us 1x Professional straps 1 set Our straps are manufactured for us and marked with our label Our belts comply with DIN EN 12195-2 All legally required information can be found on the label (Note: only straps conforming to this DIN standard are allowed to be used for fixed loads) Total length: multiple sizes Belt width: 50 mm The best belt for securing your loads. Don't play with your life and that of your compatriots The belt should be checked regularly for cracks and wear and replaced immediately if it is damaged. This is the only way to ensure optimum use. Note: The belt is not suitable for lifting loads