Description <br> How To Replace a Band Saw Tire <br> 1, Unplug the Band saw, loosen the saw blade tension and remove the blade. Then remove the band saw wheel. <br> 2, Once removed, completely remove or cur the old tire and any residue left behind. <br> 3, Slide part of the tire onto the wheel rim, then slip a short rod or pipe between the tire and wheel. Roll the pipe around the rim once to equalize the tires elasticity. <br> 4, Squeeze a small amount of glue onto a brush and apply it to the tire and wheel surface.Roll and repeat all the way around the rim. Let the glue dry for 24 hours before using the saw again. <br> 8 inch <br> Diameter: for 8inch (205mm) bandsaw wheel <br> Suitable for Draper, Einhell, Scheppach HBS20 band saws using 1400mm 1425mm bandsaw . <br> Size:about 12.7mm wide x 3mm thick <br> / <br> 9inch <br> Diameter: for 9inch (230mm) bandsaw wheel <br> Suitable for Delta 28-150 BS100, Craftsman, Grizzly band saws using 1570 1575mm bandsaw . <br> Size: about 12.5mm wide x 3mm thick <br> / <br> 12inch <br> Diameter: for 12inch (305mm) bandsaw wheel <br> Suitable for Makita LB1200F, Charnwood W721, Craftsman, Jet, Grizzly band saws using 2240mm bandsaw . <br> Size: about 20mm wide x 3mm thick <br> / <br> 14inch <br> Diameter: for 14inch (350mm) bandsaw wheel <br> Suitable for Jet, Grizzly, Powermatic band saws using 2560mm bandsaw . <br> Size: about 24.5mm wide x 3mm thick <br> Colour:black <br> Material:rubber <br> <br> Package Contents: <br> 2 x Band Saw Rubber Tire <br> <br> Only the above package content, other products are not included. <br> Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. <br>