1L RV Pressure Tank Constant Pressure Strong Cushioning Smooth Water Flow for Ships Yachts Pressure Stabilizing System
NOK 524,00
1L RV Pressure Tank Constant Pressure Strong Cushioning Smooth Water Flow for Ships Yachts Pressure Stabilizing System
- Merke: Unbranded
Solgt av:
1L RV Pressure Tank Constant Pressure Strong Cushioning Smooth Water Flow for Ships Yachts Pressure Stabilizing System
- Merke: Unbranded
Spar NOK 150,00 (22%)
Veiledende pris
Ikke tilgjengelig for øyeblikket
Solgt av:
Spar NOK 150,00 (22%)
Veiledende pris
Ikke tilgjengelig for øyeblikket
Vi godtar følgende betalingsmetoder
Beskrivelse
1L RV Pressure Tank Constant Pressure Strong Cushioning Smooth Water Flow for Ships Yachts Pressure Stabilizing System
Item Type: RV Pressure TankMaterial: ABS, rubber, metalVolume: 1L
Inflation Pressure: 10PSI/0.78BAR
Maximum Pressure: 125PSI/8.6BAR
Air Filling Door: Standard automatic tire valve
Inlet/Outlet Size: 1/2 inch external thread connectionApplication: Widely used in ships, yachts, RV and other pressure stabilizing system
Installation:
Easy to install in any direction, and can be installed in any direction according to the size of space, simple operation
1. Disconnect the power to the pump and according to the size of the installation space2. Open the faucet and install the pressure tank in series at the water outlet end of the pump in the direction of any installed pressure tank.
3. Fix the water pipe firmly at the inlet and outlet, if not fixed tightly, it may lead to leakage or equipment failure.
4. After installation and connection, start the pump, wait for the water to run through the whole system, water flows out from the terminal equipment, and exhaust the air from the whole piping system.
Safety Precautions.
1. Pre inflation pressure value of 10psi (0.7kg), pressure inside the pressure tank exceeds 125psi, may lead to tank explosion, resulting in personal injury.
2. The pressure inside the pressure tank is less than the pump start pressure value of 3-5psi, and the pump is the best match.
3. Use a pump with a pressure gauge through the valve at the back of the tank to adjust the pressure of the air inside the tank.
Working Principle of Pressure Tank
A. The factory has pre filled pressure for the tanks before leaving the factoryB. Turn on the pump, water into the pressure tank, when the pressure tank is filled, the pump stops working.
C. When water is needed, the water in the pressure tank enters the pipe first due to the air pressure in the liner. The water pump remains off until the pressure in the pressure tank is less than the starting pressure of the pump, the pump starts to work, and like this cycle.
- Merke: Unbranded
- Kategori: Dusjhoder
- Fruugo-ID: 396388936-846348283
- EAN: 5001315889163
Levering og retur
Sendes i løpet av 24 timer
Sendes fra Kina.
Vi gjør vårt beste for å sikre at produktene du bestiller, leveres til deg i sin helhet og i samsvar med dine spesifikasjoner. Skulle du likevel motta en ufullstendig bestilling eller andre varer enn dem du bestilte, eller hvis du av en eller annen grunn ikke er fornøyd med bestillingen, kan du returnere bestillingen eller enkeltvarer i bestillingen og motta full refusjon for varene. Se fullstendige retningslinjer for retur