15000W Integrated Solar Power Generation Kit

This off-grid solar power kit provides an integrated electricity generation and conversion system for recreational vehicles, outdoor camping, marine use, and emergency residential backup. Combining a high-efficiency monocrystalline solar panel, an intelligent 12V/24V SOECOPO LCD charge controller, and a 1400W continuous pure sine wave power inverter, this setup converts solar radiation into regulated DC electricity and household AC power. Engineered to operate in conjunction with an external 12V battery, the system powers mobile communication devices, lighting, home appliances, and electrical tools. Key Features & System Performance Clean Pure Sine Wave Output: Delivers 1400W continuous (up to 15,000W peak surge) AC power with low harmonic distortion, enabling safe operation for inductive loads, microelectronics, refrigeration compressors, and variable-speed power tools. High-Efficiency Monocrystalline Silicon: Fabricated with monocrystalline solar cells on a durable aluminum substrate with protective PET lamination to optimize light absorption and maintain stable output. Intelligent Auto-Detect Charge Controller: Automatically recognizes 12V and 24V battery systems, regulates current flow (30A–100A rating), and displays real-time voltage, current, and battery levels on a digital LCD screen. Multi-Port Power Distribution: Provides DC 18V solar charging, dual 5V USB ports for mobile devices, and standard AC household outlets on the inverter module. Comprehensive Circuit Protection: Built-in safeguards protect against battery overcharging, over-discharging, short circuits, thermal overload, and reverse polarity. Technical Specifications Photovoltaic Solar Panel Rated Power: 25W (Operating range up to 300W peak) Output Interfaces: DC 18V + USB 5V Cell Type: Monocrystalline Silicon Substrate & Surface Material: Aluminum Substrate + Weather-Resistant PET Film Dimensions: 540 mm × 280 mm (21.25" × 11.02") SOECOPO Intelligent Charge Controller System Voltage: 12V / 24V Automatic Recognition Rated Current Capacity: 30A – 100A Monitoring Interface: Digital LCD Screen (Real-time Voltage, Current, Battery Level) Auxiliary Output: Dual USB 5V Ports Operating Temperature Range: -35°C to +60°C Pure Sine Wave Power Inverter Continuous Rated Power: 1400W Peak Surge Capacity: 15,000W DC Input Voltage: 12V AC Output Voltage: 220V / 110V Conversion Efficiency: > 90% Output Waveform: Pure Sine Wave Appliance Compatibility & Load Reference Household Electronics Mobile Phone & Tablet Chargers: 5W – 10W Laptops & Notebooks: 60W – 120W Electric Floor Fans: 40W – 80W 55-Inch Televisions: 50W – 150W Refrigerators: 80W – 250W Microwave Ovens: 700W – 1200W 1 HP Air Conditioners (Wall-Mounted / Portable): 800W – 1200W Outdoor & Camping Gear Portable LED Lighting: 5W – 30W Drone Battery Chargers: 50W – 100W Digital Projectors: 80W – 200W Electric Ovens: 800W – 1200W Coffee Machines: 600W – 1200W Tools & Utility Equipment Cordless Tool Charging / Electric Wrenches: 200W – 500W Hand Drills: 300W – 600W Percussion & Rotary Hammer Drills: 800W – 1200W Water Pumps: 500W – 1200W Battery Selection & Capacity Sizing Guide The operating output of the inverter depends on the capacity and discharge rating of the connected 12V battery: Calculating Output from an Existing Battery: Maximum Output Power (Watts) = Battery Voltage (V) × Battery Capacity (Ah) × 0.72 Calculating Required Battery Capacity for Desired Load: Required Battery Capacity (Ah) = Inverter Output Load (Watts) / Battery Voltage (V) / 0.72 Standard 12V Battery Output Capabilities 70Ah Battery: Up to 604W continuous power output 100Ah Battery: Up to 864W continuous power output 150Ah Battery: Up to 1296W continuous power output Installation & Operating Instructions Protective Film Removal: Peel off the clear protective transport film from the surface of the solar panel prior to deployment. Controller-to-Battery Connection (Prerequisite): Connect the charge controller to the 12V battery terminals using the supplied controller alligator clips. The controller requires battery power to initialize and detect voltage before receiving solar power. Panel-to-Controller Connection: Connect the DC output cables from the solar panel into the solar input terminals on the charge controller. Inverter-to-Battery Connection: Attach the inverter directly to the 12V battery posts using the heavy-duty inverter cables and clamps. Solar Exposure: Position the solar panel outdoors angled directly toward sunlight. Avoid placing the panel behind window glass or beneath tree shade. Package Contents 1 x Monocrystalline Solar Panel (540 mm × 280 mm) 1 x SOECOPO Intelligent LCD Charge Controller 1 x 1400W Pure Sine Wave Power Inverter 1 x Controller Alligator Clip Set 1 x Inverter Battery Clamp Set 2 x DC Cables (Red / Black) 1 x 12V Vehicle Inverter Connector Cable 4 x Mounting Suction Cups 2 x Heavy-Duty Carabiners 1 x User Manual