Features: When water flows through the preset flow channel, it displaces the magnet. As the magnet moves near the reed tube, the reed tube conducts upon detecting the magnetic field. When there is no water flow, the magnet returns to its original position via spring force, and the reed tube disconnects when it no longer senses the magnetic field. Thread: G1/4-inch, startup flow: 300ml/min, response time: less than 1 second. Lightweight, compact design, stable performance, low water pressure start-up, easy to install, safe to use. Suitable for use in water dispensers, water purifiers, water vending machines, and similar applications. Made of high-quality materials for durability and long-term use. Specifications: Material: Plastic Body size: Approx 6.2 x 2.8 x 1.6cm / 2.4 x 1 x 0.63in Applicable water quality: Turbidity less than 1; Fe, Co & Ni less than 0.3 mg/L Applicable water pressure: Equal to or less than 0.8MPa Applicable water temperature: 5–50°C Ambient humidity: Less than 85% Storage temperature: -20–50°C Thread: G1/4 Startup flow: 300ml/min Response time: Less than 1 second Switch type: Normally open Wire length: 50cm Cable connection strength (outlet end of the body): 20N tensile force applied along terminal axis for 10 seconds 20N pulling force applied perpendicular to terminal for 10 seconds (no damage at connection) Hydrostatic pressure: Open at 1.05MPa for 5 minutes (no leakage or damage) Voltage resistance: Applied between live and non-live parts DC160V for 1 minute or DC200V for 1 second (No flashover or breakdown) Maximum closing current: 0.5A Maximum load current: 1A On resistance: 0.12Ω Disconnect resistance: 10¹²Ω Power connection capacity: 0.2PF Note: Please allow 1–3cm error due to manual measurement. Ensure you are comfortable with this before purchasing. Due to differences between monitor displays, the image may not reflect the actual color of the item. Package includes: 1 x Water Flow Switch