12V Normal Close Engine Flameout Off Valve XHQ-PT-NC

Usage TipsThe two normal versions have identical appearance with only functional differences:Normal type: NC. When off, it pulls. When on, it pushes.Technical ParametersWorking voltage: 12V (9-15V DC), 24V (18-30V DC)Current: 12V-2.0A, 24V-1.0A. The power supply disconnects automatically when the full action current moves into position, with working current less than 15mA.Control working current: Less than 15mATravel: 53+1mmMaximum tension: 90NMaterial: Plastic+MetalAmbient temperature: -30 to 60℃Action time: Less than 2 secondsOverload protection function: When the load is too heavy or the device is stuck, it stops working automatically to avoid component damage. Disconnect the power supply for a period of time after the fault is cleared, and the device will reset automatically to resume normal operation.Wiring InstructionsThe flameout device is equipped with 3 lead wires, with the following definitions:Red: Power supply positiveYellow, green or blue: Power supply cathode, which serves as the control lineClosed type: The flameout device activates when the control line is closed, and stops automatically when the action is completed. Release the control line of the flameout device, and it stops automatically when the reset action is completed.Installation NotesBefore installation and commissioning, confirm that before the flameout device completes its action, the crude oil engine stop control rod does not reach the limit position and cause the flameout device to be stuck. Otherwise, the internal overload protection circuit of the flameout device will be triggered, and the flameout device will stop working automatically. Disconnect the power supply of the flameout device, adjust the installation position, and reconnect the power supply of the flameout device to resume normal operation.Package Contents1 x Solenoid Valve