10 PCS 900M-T-4C Big C Type Lead-free Electric Welding Soldering Iron Tips

NOK 229,00
+ NOK 88,99 i frakt

10 PCS 900M-T-4C Big C Type Lead-free Electric Welding Soldering Iron Tips

  • Merke: Unbranded
Solgt av:

10 PCS 900M-T-4C Big C Type Lead-free Electric Welding Soldering Iron Tips

  • Merke: Unbranded

NOK 229,00

Spar NOK 220,00 (48%)

Veiledende pris

NOK 449,00
På lager
+ NOK 88,99 i frakt
Solgt av:

NOK 229,00

Spar NOK 220,00 (48%)

Veiledende pris

NOK 449,00
På lager
+ NOK 88,99 i frakt

Vi godtar følgende betalingsmetoder

Beskrivelse

10 PCS 900M-T-4C Big C Type Lead-free Electric Welding Soldering Iron Tips

10 PCS 900M-T-4C Big C Type Lead-free Electric Welding Soldering Iron Tips Use and maintenance of iron head: 1. The soldering iron head is the heat conducting part of the welding table. It mainly consists of four metal materials: copper, iron, nickel, chromium and tin. - Copper, as a heat conductor, is the main component of the soldering iron head. About 85% of the soldering iron head materials, copper has good thermal conductivity, which is conducive to the rapid heating of the soldering iron head. Good soldering iron heads are made of copper, but some manufacturers use brass, in order to reduce costs, but also reduce the thermal conductivity of the soldering iron head. Iron, which acts as an anticorrosion, is the key factor affecting the service life of the iron head. Good soldering iron head has fine and dense crystal structure and good corrosion resistance. This soldering iron head has long service life and good tin effect. Manufacturers with poor iron plating technology mainly rely on the thickness of the iron plating layer to control the service life of the iron head. Usually, the iron plating layer is thicker and the iron head is not tin, thin and durable. Nickel - plays an anti rust role in iron plating, and is convenient for subsequent chromium plating. Chromium - non stick tin prevents the use of tin to run on the iron head. The general chrome plated time is more than 5 minutes, and the ordinary decorative chrome plating is about 1 minutes. Tin - in the head, in the use of sticky tin parts. This is the composition of the iron head material, indispensable. 2. Keep welding head clean. -Wipe the solder, tin and oxide on the welding head with a special wet sponge. After each use, it is necessary to clean the oxide on the welding head and add new tin on the tin plating layer of the welding head. 3. Keep the tin on the welding head. - This can reduce the oxidation chance of the welding head and make the welded iron head more durable. After use, the new tin layer should be coated only after the humidity of the so Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-Minnanxin
  • Fruugo-ID: 440900862-925292377
  • EAN: 7776011863776

Levering og retur

Sendes i løpet av 2 dager

  • STANDARD: NOK 88,99 - Levering mellom kl tir. 23 desember 2025–man. 29 desember 2025

Sendes fra Kina.

Vi gjør vårt beste for å sikre at produktene du bestiller, leveres til deg i sin helhet og i samsvar med dine spesifikasjoner. Skulle du likevel motta en ufullstendig bestilling eller andre varer enn dem du bestilte, eller hvis du av en eller annen grunn ikke er fornøyd med bestillingen, kan du returnere bestillingen eller enkeltvarer i bestillingen og motta full refusjon for varene. Se fullstendige retningslinjer for retur

Produktoverholdelsesdetaljer

Vennligst se samsvarsinformasjonen som er spesifikk for dette produktet skissert nedenfor.

Følgende informasjon er gitt av den uavhengige tredjepartsforhandleren som selger dette produktet.

Produsent:
Følgende informasjon skisserer kontaktinformasjonen til produsenten av det aktuelle produktet som selges på Fruugo.

  • Shenzhen Sihaiyi Investment Consulting Co., Ltd
  • Shenzhen Sihaiyi Investment Consulting Co., Ltd
  • No. 101, Lane 4, Private Residential Area, Wuhe Community, Bantian Sub-district, Longgang District, Shenzhen City
  • Shenzhen
  • CN
  • 518129
  • ntalieliang@163.com
  • 13480047144

Ansvarlig person i EU:
Følgende informasjon skisserer kontaktinformasjonen til den ansvarlige personen i EU. Den ansvarlige personen er den utpekte økonomiske aktøren basert i EU, som er ansvarlig for samsvarsforpliktelsene knyttet til det relevante produktet som selges til EU.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • France
  • 75004
  • infoapexchen@gmail.com
  • 33745713901