Product: DIP Switch — Sliding Type, 3-position (2 rows of 6 pins) Why this DIP switch helps you Compact, reliable manual configuration for electronic circuits: choose between three positions per pole to set device addresses, modes, or feature options without firmware changes. Standard 2.54 mm (0.1") pitch makes it easy to mount on PCBs and match common headers and connectors for quick integration. Low contact resistance and defined electrical ratings give predictable performance for low-power signal switching. Key specifications Type: Sliding DIP switch, 3-position per pole, 2 rows of 6 pins (12 pins total) Pitch: 2.54 mm / 0.1 inches Electrical ratings: Rated protection 100 mA DC, 50 V; switching value 25 mA DC, 24 V Contact resistance: 50 mΩ at start (measured at 24 VDC / 100 mA); typically 100 mΩ after life test (24 VDC / 100 mA) Size (L x W x H): 9 x 10 x 11 mm (approximately 0.35 x 0.39 x 0.43 inches) Main materials: Plastic and metal Available colors: Blue, Gold, White, Black What makes it stand out Practical 3-position sliding action gives more configuration options than simple on/off DIP switches while remaining compact. Standard 2.54 mm pitch ensures broad compatibility with through-hole PCBs, prototyping boards, and common sockets. Durable metal contacts with documented start and post-life-test resistance values provide reliable, repeatable operation for low-current digital and analog signals. Ideal applications Embedded systems and IoT devices: set device IDs or operation modes on small PCBs without soldering changes. Industrial controls and instrumentation: configure options or select test modes where a small, rugged mechanical selector is required. Prototyping and small-run electronics: quickly change circuit settings during development or field service. Installation and compatibility notes Designed for PCB mounting with 2.54 mm pitch; verify board footprint matches 2 rows of 6 pins. Intended for low-current switching and signal-level applications; observe the rated protection (100 mA DC, 50 V) and switching value (25 mA DC, 24 V) to ensure reliable operation. Materials and finish Body: durable plastic; Contacts: metal (gold-colored and other finish options available) Color choices help visually differentiate configurations or match product aesthetics. If you need a compact, standard-pitch sliding DIP switch for reliable low-current signal configuration, this 3-position, 2x6-pin module delivers straightforward installation, clear mechanical feedback, and documented contact performance.