02/03/05/07/10ML Conductive Adhesive Glue Low Resistance Quick-drying Conduction Paste Silver Paint PCB Flex Cable Solid powder: 60-80% _x000D_ Specific gravity: 25 centigrade1.46-1.48g/cm3 _x000D_ Resistance: < 0.02 ohm /sq _x000D_ Membrane thickness: 12 microns _x000D_ Viscosity: > 20000CPS _x000D_ Shielding effectiveness: > 80dB _x000D_ Recommended film thickness: 12-16 microns _x000D_ Recommended diluent: anhydrous ethanol _x000D_ Dilution ratio: conductive paint: diluent =1:0.7-0.8 (weight ratio). _x000D_ Humidity test: 85 centigrade /85%, relative humidity 7 days, resistance value unchanged. _x000D_ Drying conditions: 60 degrees 20 minutes_x000D_ Features: _x000D_ Silver conductive glue paste tool for electronics PCB circuit board repair._x000D_ Easy to use, just plug and play._x000D_ Ideal for rigid and flexible substrates._x000D_ Versatile, it can be used for repairing membrane switches, and home supplies, electrical items, CPU in computer, LED display, LCD display, optical fiber communication equipment, controller, heat sink and LED etc._x000D_ _x000D_ Usage method:_x000D_ 1. Apply the silver glue/paste in the place you want._x000D_ 2. After the desired tracks get covered, Please allow one hour for drying._x000D_ 3. If you want it drying rapidly, blow it with a hair dryer for 10-20 minutes will be OK._x000D_ 4. Do not remove the needle before use, and twitch back and forth to make the conductive silver paint fully mixed._x000D_ _x000D_ Note: _x000D_ Please allow 1-3mm differs due to manual measurement. _x000D_ Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding. _x000D_ _x000D_ Package list:_x000D_ 1 x Conductive Adhesive Glue _x000D_ _x000D_ _x000D_ _x000D_