Col:green Material:CCL Housing wire connects are waterproof design, good sealing, suitable f harsh environments Look beautiful, , anti-jamming perfmance Ultra- high-precision op amp circuit, high accuracy, good stability The power supply has reverse polarity protection, surge protection, overcurrent protection Suitable f weighing, pull pressure, tque, other strain sens. Wking voltage: 12VDC- 24VDC Sens Sensitivity: 2.0MV / V Excitation output: Output excitation voltage 5V (E and). Output signal: 0-10V Operating temperature range: -20 - 80 Operating Humidity: 10% RH-90% RH (non-condensing) Accuracy: 0.2% F.S Precision is 0.05% F.S DIP switch is appropriated f OFF, VO output 0-5V, when to the ON, VO output 0-10V, when DIP switch No. 2 are appropriated f OFF. 1. Zero adjustment 1: voltage regulation, first the system is unloaded, the regulated voltage zero potentiometer (Vzero) to adjust the zero point. Measured with a multimeter voltage output terminal VO, let indication as close to zero indication. 2: The current adjustment, first the system is unloaded, the current zero adjustment potentiometer (Izero), with a multimeter block measuring the current output of the current IO, try to let it close to 4mA. The re-examination The system is unloaded, the measured zero output; load a certain weight values, measured output voltage is expected magnification. If you do not match, adjust again. Package Contents:1 x 0-10V Load Cell Sens Transmitter Note: Light different displays may cause the col of the item in the picture a little different from the real thing. The measurement allowed err is 1-3cm.