Window Cleaner Robot 5600Pa Suction Smart Window Cleaner Automatic Remote Control Robot Window Washer for Home Office Building Beauty Salon GB Plug Item Type: Window Cleaning Robot Size: Approx. 290x144x102mm / 11.42x5.67x4.02in Output: DC24V/3.75A Main Battery: Built in Lithium Battery 500mAh Remote Control Battery: 2 x AAA Battery (not included) Power Rating: 90W AC Power Cord Length: Approx. 1.2m / 3.94ft DC Adapter Cable Length: Approx. 4m / 13.12ft Security Rope Length: Approx. 4m / 13.12ft UPS Operating Time: Approx. 20min Cleaning Speed: Approx. 4min/㎡ Maximum Working Window Size: 6x4m / 19.69x13.12ft Minimum Working Window Size: 0.35x0.35m / 1.15x1.15ft Suction Power: 5600 Pa Automatic Cleaning Modes: 3 Application: for Home, Beauty Salon, Office Building, Store, Club etc. Description: This is a window glass cleaning robot. It has a vacuum motor that allows the robot to adhere to the glass surface and move freely on vertical glass surfaces. It has an uninterrupted power supply system (UPS) to provide power in case of power outage to prevent falling. The cleaning robot has two cleaning wheels with suction, walking, and cleaning functions. The cleaning wheels can adhere and move on vertical glass surfaces. The cleaning pads on the cleaning wheels can be easily removed, replaced, cleaned, and reused. The cleaning pads are made of fine fiber cloth, with excellent cleaning effects. The robot has artificial intelligence (AI), can plan paths, and automatically detect window frames. It has automatic cleaning mode and manual cleaning mode for users to control the robot freely. How e 1.Plug in the power adapter, turn the robot on (blue LED) and make sure the motor is working, then stick the robot on the glass about 10cm away from the frame (for robot self test). 2.Make sure the robot is firmly fixed on the glass and make sure the security rope and power cord do not interfere with the cleaning way of the robot. 3. Press the auto clean button on the remote control and the robot will move from the bottom to the top of the window and then move in a jagged pattern, cleaning the window from left to right and top to bottom. After cleaning, the robot will return to its starting position at the bottom and make a "drop" sound. 4. If the robot accidentally stops in an inaccessible place, gently pull it back with the security cord. 5. When disassembling the robot, please hold the security cord with one hand and remove the robot with the other hand, then turn off the power. Note: The robot must be connected to the power adapter to work properly! How to Clean Steps Step 1: If the glass is dirty or dusty, please clean it with a dry pad (do not spray any water) during the first round in order to remove the dust from the glass. If you spray water or detergent on the cleaning pad during the first round of cleaning, the water or detergent will mix with the sand and dust and turn it into mud. Step 2: Install a clean and dry cleaning pad on the cleaning ring and make sure the ring is securely mounted on the cleaning wheel. Then spray a little water or detergent (2 to 3 sprays) on the clean pad. It should not be too wet. A completely wet cleaning pad will affect the Operating of the robot. If there is sand or dust on the glass, spray the area with water or detergent, let the water or detergent soak the area, and wait 2 to 3 minutes before cleaning. Step 3: Replace the rag with a clean, dry one and spray water or detergent around the edges of the cleaning pad to increase the robot's vacuum suction, thus improving cleaning performance.