[FEATURES]You can use this board to convert the motherboard's USB3.0 interface 19PIN to TYPE-E and install the TYPE-C on the front of the chassis through the chassis extension.The type-C reversible design simplifies the connection and allows you to plug in any way without worrying about it being upside-down. Supports data transfer to and from all your USB-C devices at speeds of up to 10Gbps, and delivers 100W power supply. [ TPE MATERIAL FLAT CABLE]TPE material super thin flat cable is very flexible, this material cable can be bent and folded to 180 degrees thousands without damageIt adopts 16-pin USB3.1 cable and four high-speed signal lines. The use of silver-plated material to reduce the impedance of the conductor, enabling you to enjoy a faster data transfer speed. The shielding layer are braided with tin-plated copper wire, which makes the signal transmission more stable. [EXTENSION USB 3.1 CABLE] fast charging and superspeed transfer data from your USB A devices by using this cable. This enables you to connect phones, tablets, flash drives, mouse, and other USB C peripherals to your laptops and chargers with normal USB. One side USB C 3.1 protocol for high speed data transfer up to 10Gbps and other functions and delivers 100W power supply. [ CONNECTION&COMPATIBILITY]Compatible with both USB 3.0 or USB 2.0 devices when both motherboard USB 3.0 & USB 2.0 headers are connected. Motherboard supported - IX FORMULA,STRIX Z270I/Z270G. [The attached interface is USB3.0 19PIN TYPE-E 20PIN Adapter card]The interface is USB3.0 19PIN TYPE-E 20PIN, the connection is stable.Mounted to the PCI bracket, helps you easily connect the devices with type C interface. it's easy to up and install and just an extension/port so no need to install drivers. Colour: black + blue Material: TPE + PC + metal Size: Cable length: about 50cm Package Contents: 1 x USB3.1 Gen2 front panel adapter with mounting screws 1 x 19PIN TYPE-E20PIN Adapter card Only the above package content, other are not included. Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.