Feature:This is a normally close proximity switch sensor with 5mm detection distance.When proximity switch is close to some target object, it will send out control signal. It is a component widely used in automatic control industry for detecting, controlling, and non-contact switching.High sensitivity, quick response, stable performance.Non-contact detection avoids the sensor and the target object from damages.Specification:ModelSN04-N2Detection distance5mm 10%Set distance0 - 4mmDelay distance<10% Detection distanceStandard objectMagnetic metal(Detection distance decreases for nonmagnetic metals)Detect objectIron 18*18*1mmResponse frequencyDC:0.5kHz AC:25HzPowerDC12 - 24V(6-36V); AC110 - 220V(36 - 250V)50/60HzWithstand voltage AC1000V 50/60Hz Effect of Voltage15% Rated voltage, Impulse (P-P) below 10%Consumption currentN.P: <13mA, D: <0.8mA, A:<1.7mAControl OutputN.P: <300mA, D:<200mA, A:<400mACircuit protectionA: Surge protection N.P.D: Surge protection, Reverse Connection ProtectionTemperature range-25 -+60Isolation Resistance>50MMaterialABSStorage and use temperature-30 - +65(No ice, no frost)Storage and use humidity35 - 95%RHPackage list:1 * Inductive Proximity SwitchNote:The actual product color may deviate from the photo due to light.There may be a slight deviation in the measurement of product..Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.