The SA6 is a simple portable spectrum analyzer and signal source designed to display the spectrum of signals in the frequency range 35 to 6200MHz.The analyzer finds the magnitude and frequency of the components of the process being analyzed. Spectrum analyzers can process signals of all widely used technologies: Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc.Another important feature is the additional functionality of the tracking generator, which makes it possible to measure the frequency response of passive or such as filters or amplifiers. The software allows measurement of SWR and return loss modules. This requires an external directional coupler and a calibration measures. SA6 is mainly used for field operations.The device is , and consumes low energy consumption. It enables service centers and maintenance to perform on-site HF analysis for commissioning and repair work. Additionally, the spectrum analyzer is the perfect solution for repair shops and radio amateurs.For example, you can use the device to: place an external antenna on a base station / do a quick analysis of the RF environment / check the correct operation of a repeater cell.Display frequency range: 35 - 6200 MHzMeasurement frequency range: 35 - 4500 MHzDynamic range in the 35-3000 MHz band: 75 dBDynamic range in the 3000-4500 MHz band: 70 dBMaximum span: 6165 MHzBandwidth: 200 kHz, fixedView the scanning speed of the frequency band above 100MHz: 700MHz/secSweep 100 MHz: less than 0.25 secondsNoise floor up to 3000 MHz: less than -90dBmNoise floor 3000-4500 MHz: less than -85dBmNoise floor 4500-6200 MHz: less than -80dBmWave impedance: 50 ohmsStanding wave ratio in the working frequency range: less than 1.5Internal attenuator: 0-30 dBError at attenuation up to 10 dB: 2 dB10 to 20 dB attenuation error: 5 dB20 to 30 dB attenuation error: 8 dBTracking generator output power: -15 to -25 dBmAccuracy in dynamic range: 2.0 dBThe maximum input power of the attenuator at 0 dB: 10 dBmMaximum input power when attenuation is 20dB: +20dBmMaximum input measurement signal: +10 dBmMaximum input : 25VMaximum current consumption when running on battery: 450 mAMaximum current consumption when running from USB: 500 mA (when charging)Battery: 2500 mAhDuration time: 3 hoursBattery charging time: ~ 5 hoursColour:blackMaterial:metal+plasticPackage Contents:1 x SA6 Spectrum Analyzer2 x SMA-SMA Extension Cable1 x Data Cable1 x Resistive stylus1 x SMA- passed connectorOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.