10 set oacute;w proximity sensor NPN non-magnetized inductive sensor with gasket NK-5003C 1. Complete accessories: including 10 set oacute;w sensor oacute;w equipped with magnet oacute;w sheets, washers and nuts, high practicality. 2. Nickel-plated brass: using nickel-plated brass material, it has good conductivity and strong anti-disturbance ability. 3. With Sensor Chip: The ABS probe has a built-in intelligent sensor chip, which has a fast frequency response and induces induction near metal objects. 4. With indicator: with signal indicator, when a metal object is detected, the light turns on normally, and when the light is turned off, it is normally closed. 5. Multiple applications: NPN without output mode, suitable for industrial assembly lines, machine tools and automation equipment, etc. Specification: Item type: proximity sensor Product material: ABS + brass Product model: NJK-5003C Supply voltage: DC 5-30V Current rated: 300MA Output mode: NPN no Induction distance: approx. 10mm/0.4in Product length: approx. 1.2 meter/3.9ft Nut size: M18 Product quantity: 10 set oacute;w Product size (not including cable length ): M18x42mm Scope of application: assembly lines, machine tools, automation equipment etc. Package list: 10 x sensors 20 x gaskets 20 x nuts 10 x magnet sheets Note: 1. The current sensor must select the products with different specifications according to the rated effective value of the measured current. 2. If the measured current exceeds the limit for a long time, it will damage the end-pole amplifier tube (with respect to the magnetic compensation type). Under normal conditions, the duration of 2 times the overload current should not exceed 1 minute.