1. For Banana pi -M2 Zero is an extremely small single-board computer. It is designed with the Allwinner H2+ chip solution. It can also be used directly with the Allwinner H3. The size is exactly the same as the Zero W. The size is 60mm x 30mm 2. Support onboard WIFI and Bluetooth, 512M memory, Mini -compatible interface. 3. For Banana Pi -M2 Zero supports Android, Debian linux, , Raspbian , which can be used for IoT and educational application development. Module: for Banana Pi -M2 Zero CPU: H3+ -core -A7 H265/HEVC 1080P GPU: Mali400MP2 GPU @600MHz, Supports OpenGL ES 2.0 Memory (SDRAM): 512M DDR3 (shared with GPU) Onboard Storage: TF card (Max. 64GB) Onboard Network: ( can extension with PIN define) PoE power: Onboard flash: Onboard WIFI: SDIO AP6212 (option AP6181, AP6335) Video decoding: 1080p@60fps, 264 Video encoding 1080p@30fps, 264 Video input: A CSI input connector Camera Video Outputs: mini -compatible 1.4, 1080P@30fps, DHCP Audio Output: Mini -compatible Power Source: -USB with 5V/2A USB 2.0 Ports: one USB 2.0 OTG Buttons: Power Button, Reset Button Low-level peripherals: 40 Pins Header, compatible with 3 uart GPIO(1x3) pin: UART, ground LED: Power led & Status led IR: N/A Supported OS: android linx Product size: 65mm x 30mm Colour:blue Material:PCB+metal Package Contents: 1 x -M2 Zero development board 1 x acrylic case 1 x heat sink 1 x screw package Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.