LED light curing machine adopts the light-emitting diodes Blue-ray, it cancure the resin with the wavelength of 420-480nm, and be used to repairthe teeth in the department of stomatology;There are three solidification working light modes: strong light mode, flashing light mode, gradual light mode.The light-emitting diodeshas , which can greatly reduce the costs of maintenanceof the machine; does not any heat when running, so no needto cool it with fan, thus, it is free from the annoyance of noise andvibration of machines;Thehigh capacity lithium batterycan last about130-200 after being fully (4-8 hours).Intelligentbattery detection circuit function:when batteryis low, it will alarm and the light will flash.Lightweight and two-stage design, first low-light irradiation, and then rapid curing.This can inhibit the excessive contraction of the resin surface, avoidcracks between cavities edge.Plug Type:EU Plug,it applies to Indonesia, , , , and so onBattery (rechargeable): lithium batteryBattery capacity: 2200mAhBattery : 3.7VCuring time and depth: 5s/3mmBlue light wavelength: 420-480nmBlue light intensity: 1200-200mw/cmColour:blackMaterial:plasticPackage Contents:1 x Curing Light setsOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.Our products are made with the highest quality materials and are designed to provide you with the best possible user experience.