50g DIY Polymorph Thermoplastic Polycaprolactone Moldable Plastic PelletSpecification:Good dissolubilityHigh crystallinity and low melting pointGood ductility (Tg: -60C ) ; Melting point is 58C -62C.Temporary , and more DIY Crafts, Tools, Grips, Repairs, Games, Costumes, Jewelry, Robot parts.1. Simply heat the pellets in water to over 42C (Needs water that's been boiled).2. Leave the pellets to melt in the water until they turn transparent.3. the pellets from the water and mould by hand (add color at this stage if required)4. Allow the polymorph to cool until.5. Re-heat if further molding is required.Warning:1. Never heat polymorph over 200 C as this will damage the polymer.2. Wait around 5 min it cools down before you reheat and reshape it again.3. Do not . if swallowed.4. Product should be ok to use for children 10+5. Product may become hot.Material: PolycaprolactoneSize: 4mmColor: WhitePackage Include:1 Bag polymorph Thermoplastic