NOTE: 1. This protectors the maximum current is 63A normally, and the peak heating current can reach 80A.2. There will be a plus or minus 5% deviation between the voltage displayed by this protectors and the actual local voltage (this protector is not a profeional measuring instrument, if you need to measure accurate voltage,please choose other instrument) Function: 1. Under voltage protection 210V-140V (adjustable) (default: 140V)2. Over voltage proteciton 230V-300V (adjustable) (default: 280)3. Over current protection 1A-63A(default: 63A) /1A-40A(default: 40A)(adjustable)4. Reconnect time (delay on time): 1s-30s (default: 30s)5. Voltage meter6. AmmeterRated voltage: 220V; Frequency: 50HzError in real-time current, voltage : 5% 1Over Voltage And Under Voltage Protective Device With Auto-Reclosing Function is an intelligent protector integrated with overvoltage protector, under voltage protector and over-current protector. In case of over-voltage fault, under-voltage fault or over-current fault in line, this product can instantly power off to prevent electrical equipment from being burnt. The over-voltage, under-voltage and over-current values of this product can all be set up by yourself and can be adjusted on the basis of local practical condition.22.1 In case of over-voltage fault, under-voltage fault or over-current fault in single phase line, the product can power off the line and can automatically restore connecting the line over a time delay after voltage of the lien is recovered to normal condition.2.2 In case of transient over voltage in line, the product can protect the equipment from false operation.2.3 In case that the line subjects to unstable voltage or sudden power-off and power-on due to loosened connection and other fault, the product will disconnect the line.2.4 When fault voltage of the line reaches the peak, the product itself will not be damaged.2.5 Voltage protection range: 0450V for 40A; 0600V for 50A/63A.2.6 Impulse withstand voltage: 4KV (in compliance with safety standard for electrical appliance of category III).33.1 Normal use conditions3.1.1 Ambient air temperatureAmbient air temperature shall not be more than +40 and not le than -5 and the 24h average temperature shall not be more than +35.3.1.2 AltitudeAltitude of the installation place shall not exceed 2000m.3.1.3 Atmospheric conditions3.1.3.1 HumidityThe relative air humidity at installation place shall not be more than 50% when the ambient air temperature is +40; Relative humidity may be high under low temperature condition. For instance, when the mean minimum temperature in the wettest month is +20, the mean maximum relative humidity in the month may reach 90%. Condensation produced due to temperature change shall be prevented by taking appropriate measure.3.1.3.2 Cla of pollution: 33.2 Installation conditions3.2.1 Protector can be vertically or horizontally mounted in cabinet. If specially required, it is neceary to make special order.3.2.2 Protector shall be mounted in medium without risk of explosion. In the medium, there shall be no gas and conductive dust which are sufficient to corrode metal and affect insulation effect.3.2.3 Protector shall be mounted in place that may not be invaded by rain and snow.44.1.1 Rated voltage: 220V; Frequency: 50Hz4.1.2 Rated current: 1A-63A (adjustable) (default: 63A)4.1.3 Under-voltage action switch-off value: 210V-140V (adjustable) (default: 140V)4.1.4 Over-voltage action switch-off value: 230V-300V (adjustable) (default: 280)4.1.5 Reconnect time (delay on time): 1s-600s (default: 30s)4.1.8 Cut off in 1s if over volatge, under voltage or over current.4.1.9 Power consumption2W4.1.10 Electrical and mechanical life500000 cycles4.1.11 Boundary dimension: 813560mm4.1.12 Over-voltage and under-voltage action parameters and restoration parameters may be adjusted as required by customer.4.1.13 This product is in over-entering and down-out mode.4.2.1 Characteristics and time of rated action4.2.2 Rated connecting capacityIt refers to the current that can be reliably connected and disconnected under long-term continuous working condition of the protector.4.2.3 Rated over-current limit55.1 Pre and hold on the set key ,entering into setting status;5.2when "up-"show , set up the overvoltage value by preing the up key or down key to increase or decrease the overvoltage value which can be 210V-300V (default: 280V).5.3: Pre the set key, when "Lo-", set up the under-voltage value by preing the up key or down key to increase or decrease the under-voltage value which can be 145V-210V, (default: 170V).5.4: Pre the set key, when "PC-", set up the over-current value by preing the up key or down key to increase or decrease the over-current value which can be 1A-63A (adjustable) (default: 40A).5.5: After the setting, pre "set" key for 3s,setting will be stored6After being installed, the protector can be wired by user. Wherein, cro section of the wire s