Sports drawstring bagDrawstring backpack, gym training bag, waterproof storage bag, badge material, woven label size of 6.5 cm, all badges have glue on the back. Usage: 1. Keep your back clean before ironing, and adjust the temperature to a temperature suitable for the clothes according to how the iron is used. 2. Put the cloth sticker in a suitable place (don't tear off the glue) and iron it back and forth several times, usually about 15 seconds. 3. To prevent burns, you can put a thin cotton cloth on the cloth (must be pure cotton, but not faded cloth). After ironing, check whether the edges are ironed well, and then iron the edges several times. 4. The thickness of the decal should be used to determine the temperature. If it is thicker, the temperature must be higher and the heating time will be longer. For particularly thick cloth stickers, you can iron them several times on the back. 5. Special attention: For cloth stickers with sequins or shiny surfaces (because sequins are plastic products), be sure to lay a layer of cloth and iron them at low temperature (below 150C), or directly use a steam iron. Or put a damp cloth on it. So as not to cause the plastic sheet to melt due to excessive temperature. 6. The best way is to sew a few stitches on the edge of the cloth with a needle and thread after ironing, which is firmer and more convincing. 7. If you dont have an iron at home, you can also use the same color thread to sew the cloth on the clothesFigureThe height of the doll is about 7cmNecklace, keychainIncluding bead chain, tag leather cord, key ring, protective cover, tin box, 5 kinds of products are stitched by themselves